Smart Meters - Installation

Installation Schedule

Since the AMI system being used can integrate with the many of the existing AMR meters on the system (see How they Work), replacing select meters in addition to regularly scheduled replacements will allow Estes Park Utilities to gather readings from the existing AMR meters as well.  Installation schedules will be determined by billing route priority and crew availability. Notification mailers have been sent to all remaining customers in the Light & Power service area. Residential customers remain the priority for meter upgrades; we will work closely with commercial customers to coordinate meter upgrades where appropriate.

Currently, we are focusing on meter upgrades in the Fall River Road (map), Peak View Rd (map) and Highway 66 (map) areas. Updated maps will be posted here as we move to new areas.

The following areas have largely been upgraded:

  • CR43/Glen Haven & The Retreat
  • Highway 7 corridor: Meeker Park south to Allenspark
  • Pole Hill/Highway 36
  • Devils Gulch/Dry Gulch Roads
  • Little Valley

What to Expect During Installation

Estes Park Utilities personnel, or contractors with official identification, will arrive at the property and knock on the door. If the resident answers, they will provide a brief overview of the following:

  • The resident's AMR electric meter is being replaced with an upgraded AMI electric meter
  • There will be a brief power outage, so if there are any medical devices, computer or other electronic device operating, the installer should be notified and will request time for that outage.
  • For the operation of critical medical equipment, call Utilities at 970-586-5331 or 1-800-748-1717, option 1 upon receiving notification of meter installation, so staff can accommodate those important needs.
  • Utilities personnel will conduct a visual inspection of the meter socket. Although not required, this is being done as part of staff's commitment to safety.
  • The entire process should take about 15 minutes.
  • Digital displays will need to be reset due to the brief power outage, which typically lasts less than 20 seconds.

If the resident does not answer the door upon arrival of our metering staff, they will replace the meter and leave a door hanger indicating that the meter was upgraded. Elk assisting with meter exchanges

For more information:

Questions? Contact Sarah Clark, Light & Power Administrative Assistant, at 970-577-3627 or