Project Space Request Form

Completion of this form is REQUIRED to request new of additional space, or to make any alterations to existing space within DPA/DCS/Capitol Complex managed buildings.  All remodel projects in the Capitol Complex are required to have plans drawn in Revit or AutoCAD format by a licensed architect or engineer.  All plans shall be submitted for a code-compliance review of electrical, plumbing, mechanical, fire, and life safety systems. All projects must meet current building codes, and ADA requirements, per State Buildings and State of Colorado regulations.  Official building permits are required for such projects as needed. If a Revit (3D) model exists, the requesting tenant must have the architect or engineer add all approved changes to the existing model.

 

SPACE GUIDELINES
For planning purposes, refer to the Space Standards section under "Real Estate" on the Office of the State Architect Web site.

Building name and address
Agency Contact
Enter as xxx-xxx-xxxx
Project Details
Reason for Request (for example: adding staff or programs; updating or adding new finishes, such as paint or carpeting; new office configurations; or additional storage space.
Consult with a Capitol Complex representative to determine impacts on Capitol Complex Buildings.
Budget
$
Schedule
All remodel projects in the Capitol Complex are required to have plans drawn in Revit or AutoCAD format by a licensed architect or engineer. All plans shall be submitted for a code-compliance review of electrical, plumbing, mechanical, fire, and life safety systems. All projects must meet current building codes, and ADA requirements, per State Buildings and State of Colorado regulations. Official building permits are required for such projects as needed. If a Revit (3D) model exists, the requesting tenant must have the architect or engineer add all approved changes to the existing model.