New Developments

Welcome! This packet contains information for new residential projects. Bennett-Watkins Fire Rescue serves the Town of Bennett, Unincorporated Adams County, and Unincorporated Arapahoe County, and works with all three jurisdictions for new developments. Bennett-Watkins Fire Rescue abides by the 2012 edition of the International Fire Code, which has been adopted in all three jurisdictions. Each adopting jurisdiction exacted the 2012 IFC with amendments that we follow and enforce for every new development received in our district.


The 2012 IFC establishes minimum roadway and driveway requirements in each jurisdiction. Arapahoe County adopted Appendix R, in lou of the IFC requirements, and we enforce those guidelines and rules to the applicant’s in Arapahoe County. Please be aware that the guidelines for your project may vary depending on what county or municipality that you are building in, however the process is the same. The following information below includes information regarding new residential developments, and what the process is to complete your project.


Beginning Stages


  1. The applicant (Homeowner and or builder) will need to contact whichever jurisdiction they are planning on building in. (Adams, Arapahoe, or Town of Bennett).

  2. The applicant should then contact Bennett Fire Protection District and inform us of the new project in our district. Bennett Fire Protection District will then work directly with the applicant to assist them through the permitting process.

  3. The applicant will then need to complete the required documents, and turn them into the Fire District at the main office off 825 Sharis Court.


Application Process

  1. The applicant will need to fill out the following documents:

    1. Fire Service Application

    2. Submit Fee Payment ( Fees will vary depending on project )

    3. Submit a detailed site plan including all dimensions, measurements, road base content, gates, etc.

  2. Bennett Fire Protection District will review your site plan once submitted. All site plans will need to be approved before moving on. Please be aware that if you receive an email back stating that your site plan is not approved, it is typically due to incorrect or missing dimensions on the site plan.

  3. Once your site plan is approved and all other documents are turned into the main office, you will receive a letter of approval that you will need to take back to whichever county or municipality that you will be building in.

  4. Once the county or municipality receives your letter of approval, you will obtain a building permit form them.


Final Steps

  1. Once you have completed building your project, you will need to contact Bennett Fire Protection District directly and schedule a final inspection. This final inspection will include inspecting your new driveway and ensuring that the dimensions are correct that you stated on your approved site plan, your address is clearly visible from the road with the proper dimensions, and that your road base is class 6 or better with the proper depth.

  2. Once your final inspection is completed, we will sign off on your permit from the county that you received to turn in for your certificate of occupancy.