Services & Fees
|
The Colorado Metrology Laboratory offers a wide range of calibration and testing services. These services are available to both the public and private sectors on a fee basis. Calibration services are offered in the areas of mass (weight), volume, length, grain moisture, and time/frequency in both customary and metric units. The laboratory is capable of performing calibrations at varying levels of accuracy.
|
Many standards do not need calibration at the highest levels and in fact, may not be stable enough to maintain high accuracy. We will gladly answer your questions regarding what kind of calibration will best suit your needs by contacting us . We can also assist in specifying standards that you are looking to purchase. Please see FAQs to help answer some general questions.
Calibration Services
|
Category |
Description/ Weight Classes |
Examples |
Range |
|
Mass Echelon II |
ASTM 1,2,3; OIML E2, F1 |
Precision Weight Set for Precision Balances/ Comparators |
10 kg - 1 mg |
|
Mass Echelon III |
ASTM 4,5,6,7 NIST Class F OIML M1, M2, M3 |
Stainless Steel weights, Weight Sets, Dead Weight Testers Cast Iron Weights |
25 kg - 1 mg 5,000 lb - .001 lb 4 oz - 1/32 oz |
|
Volume Transfer |
Glassware, Provers, Test Measures |
5 gallon test measures |
100 gal - 1 pt |
|
Length |
Steel Tape Measures |
Survey Tapes |
Tapes: 300 ft - 1 ft |
|
Time/ Frequency |
n/a |
Stopwatches, Tuning forks, LIDAR speed guns, distance meters |
<= 100 mph |
|
Grain Moisture |
n/a |
Corn, Millet, Pinto Beans, Sunflower, Barley, Sorghum, Wheat |
<= 25 % |
Fees
Laboratory fees are $50 per hour for non-governmental entities and $25 per hour for governmental agencies. There is a minimum charge of $25 for all orders. Please contact us for a quote for your specific item(s).